Laminate Doors with Aluminum Frames



Project-Design-Implementation


Door frames are made of specially molded aluminum profiles with a wall thickness of 2-3 mm. The doors are telescopic, allowing adjustment depending on wall thickness, with integrated aluminum jambs. Aluminum door frames are manufactured with electrostatic RAL paint or natural matte galvanized finish. The special door seal housing, hinge bearing and corner joints of aluminum door frames allow for connection with fittings at an angle of 45 degrees. Pressed door wing thickness is 42 mm at a minimum. All door recesses (all 4 sides) are coated with special aluminum C profiles to provide impact and water/moisture resistance. Side recesses miay also be coated with PVC bands upon request. Glass wings may also be installed on adjustable aluminum door frames instead of laminate wings. Glass wings should be manufactured of 8, 10, 12 mm thick tempered and ground glazing, depending on the size of the wing.

1481886563_1480920668_11
1481886563_1480920669_20
1482489863__dx_9171
1482489864__dx_9343
1482489864__dx_9429
1482489864__dx_9431
1482489864__dx_9432
1482489865_05
1482489866_beztaş_tekstil_(7)
1482489866_dsc_0841
1482489866_dsc_0881
1482489866_dsc_0946
1482489866_dsc_0957
1482489867_dsc_0966
1482489867_feka_(9)
1482489867_file072
1482489867_file088
1482489867_file092
1482489868_img_4038
1482489868_safran_yemek_(15)
1482490025_433